Home / All / Valves / Gate valve /

Handwheel Extended Stem Underground Gate Valve

Handwheel Extended Stem Underground Gate Valve

Handwheel Extended Stem Underground Gate Valve
CategoriesGate valve
BrandGARLOS
Pressure:Low Pressure, 1.0MPa - 1.6MPa
Material:Cast Iron
Temperature of Media:≤200℃
Port Size:DN40-DN400mm
Medium:Water, oil, steam, etc
Update TimeApr 28,2024
Detail Information
Valve Introduction

Handwheel Extended Stem Underground Gate Valve

Application:
Extended stem underground gate valve is mainly applied to deep well installation pipe network or underground pipeline where it will easily flooded or be affected with damp. The product extends the valve actuator( Handwheel, Gear Device, Electric Device, etc) to the place where it is easy to open valve, safe and avoids flooding. In the deep wells, valve can be opened or closed without other auxiliary tools and without going down to deep wells, effectively protects the personal safety and transmission device service life, easy to use. 


Feature:
1. Gate valve is one of the most commonly used shut-off valve, mainly used to connect or cut off the medium in pipeline; the applicable pressure, temperature and nominal diameter range is large, especially suitable for middle and larger diameter pipes.
2. Rising stem gate valve’s stem drives up and down together with the disc, the stem transmission thread is on the outside of the valve body, therefore, user could judge the disc opening and closing or position according to the stem moving direction and position, and the transmission thread is easy to lubricate and free from fluid corrosion, but it requires a larger installation space.
3. Wedge rigid single disc gate valve structure is simple, size is small , reliable to use, it is suitable for various room temperature and middle temperature medium and pressure working condition.

Specification
Parameters:
Type
Gate Valve
Actuator
Handwheel
Wheel Gear
Electric
Connection
Flange
Construction
Rising Stem Wedge Single Disc
Seat
Copper Metal Alloy
GGG50
Stainless Steel
Nominal Diameter
DN40-DN800
Nominal Pressure
PN1.0MPa~1.6Mpa
Pressure Testing
Shell: 1.5MPa or 2.4MPa, Seal: 1.1MPa or 1.76MPa
Medium
Air, Water, Steam, Gas, Oil, Goalgas etc.
Materials:
Number
Name
Material
1
Valve Body
Cast Iron/Ductile Iron
2
Wedge Disc
Cast Iron/Ductile Iron
3
Extracting Iron
Cast Iron/Ductile Iron
4
Stem
Carbon Steel/Stainless Steel/Brass
5
Seal Gasket
Rubber/Graphite
6
Packing
PTFE/Oil-immersed/Graphite Packing
7
Bonnet
Cast Iron/Ductile Iron
8
Ykoe
Ductile Iron/Brass
9
Flat Key
PTFE/Oil-immersed/Graphite Packing
10
Handwheel
Ductile Iron/Brass
Structure

Design and Manufacture: GB/T12232-2005 End flange dimension GB/T17241.6-1998 Face to Face Dimension GB/T12221-2005 Test Inspection GB/T13927-2008

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

skype us

Skype: garygarlos

call us now

+86- 134 5600 7377

request a quote

Click to send feedback

NEWSLETTER
follow us