Home / All / Valves / Gate valve /

Gear Actuate Rising Stem Wedge Gate Valve

Gear Actuate Rising Stem Wedge Gate Valve

Gear Actuate Rising Stem Wedge Gate Valve
CategoriesGate valve
BrandGARLOS
Pressure:Low Pressure, 1.0MPa - 1.6MPa
Material:Cast Iron
Temperature of Media:≤200℃
Port Size:DN200-DN2400mm
Medium:Water, oil, steam, etc
Update TimeDec 15,2024
Detail Information
Valve Introduction

Gear Actuate Rising Stem Wedge Gate Valve

Application:
Widely used in water supply and drainage, gas, electricity, metallurgy, petroleum, chemical, textile and urban construction and other industries, as a device for opening and closing for steam, water, oil, pipeline.


Feature:
1.Gate valve is one of the most commonly used shut-off valve, mainly used to connect or cut off the medium in pipeline; the applicable pressure, temperature and nominal diameter range is large, especially suitable for middle and larger diameter pipes.
2.Rising stem gate valve’s stem drives up and down together with the disc, the stem transmission thread is on the outside of the valve body, therefore, user could judge the disc opening and closing or position according to the stem moving direction and position, and the transmission thread is easy to lubricate and free from fluid corrosion, but it requires a larger installation space.
3. Parallel double gate vale generally through the top wedge t produce sealing force, the relative movement between the sealing surface is small, not easy to scratch, used for low pressure, small diameter valve.

Specification
Parameters:
Type
Gate Valve
Actuator
Handwheel
Wheel Gear
Electric
Connection
Flange
Construction
Rising Stem Wedge Single Disc
Seat
Copper Metal Alloy
GGG50
Stainless Steel
Nominal Diameter
DN40-DN800
Nominal Pressure
PN1.0MPa~1.6Mpa
Pressure Testing
Shell: 1.5MPa or 2.4MPa, Seal: 1.1MPa or 1.76MPa
Medium
Air, Water, Steam, Gas, Oil, Goalgas etc.
Materials:
Number
Name
Material
1
Valve Body
Cast Iron/Ductile Iron
2
Wedge Disc
Cast Iron/Ductile Iron
3
Extracting Iron
Cast Iron/Ductile Iron
4
Stem
Carbon Steel/Stainless Steel/Brass
5
Seal Gasket
Rubber/Graphite
6
Bonnet
Cast Iron/Ductile Iron
7
Packing
PTFE/Oil-immersed/Graphite Packing
8
Gland
PTFE/Oil-immersed/Graphite Packing
9
Yoke
PTFE/Oil-immersed/Graphite Packing
10
Stem Nut
Cast Iron/Ductile Iron
11
Gear Actuator
Cast Iron/Ductile Iron
Structure

Dimension Connection Size 

Design and Manufacture: GB/T12232-2005 End flange dimension GB/T17241.6-1998 Face to Face Dimension GB/T12221-2005 Test Inspection GB/T13927-2008

Our Factory

YM Valves Producing

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

skype us

Skype: garygarlos

call us now

+86- 134 5600 7377

request a quote

Click to send feedback

NEWSLETTER
follow us