Home > Products > Valves > Hydraulic control valve >

YX741X Adjustable Pressure Reducing And Sustaining Valve

YX741X Adjustable Pressure Reducing And Sustaining Valve

YX741X Adjustable Pressure Reducing And Sustaining Valve
CategoriesHydraulic control valve
AlbumView larger image
BrandGARLOS
ModelYX741X
Nominal Pressure1.0/1.6/2.5MPa
Shell Test Pressure1.5/2.4/3.75MPa
Seal Test Pressure1.1/1.76/2.75MPa
Suitable MediumWater
Medium Temperature0-80℃
Update Time2019-12-13
Detail Information

Brief Introduction


YX741 Adjustable pressure reducing and sustaining valve is composed of main valve, needle adjusting valve, ball valve and pipe system. This valve is mainly installed at the upstream of high-rise buildings, living quarters and other pipe network, to reduce or maintain the pressure of downstream pipe network. Main valve adopts the structure of diaphragm type or piston type.  Exit pressure is set by adjusting the pressure of relief pilot valve spring and needle valve open degree, and pressure is stabilized by feedback effect from pipe network and control room, no other device or energy needed, easy to maintain, less influenced by entrance pressure and flow, high accuracy of pressure controlling, reliable pressure reducing and maintaining.


Working Principle


When the pipe started water supply, water flows through needle valve into main valve control room, the outlet pressure affect onto the pilot valve via tube. When the outlet pressure is higher than pilot valve setting pressure, pilot valve is closed, control room stops draining, main valve control room pressure rises and the main valve will be closed, the outlet pressure will not rise any more.
When the outlet pressure is lower than pilot valve setting pressure, control room drains to downstream. Pilot valve displacement is higher needle valve water inflow, main valve control room pressure reduces, main valve will be opened by inlet pressure. Under the stable state, control room inflow is the same as displacement, open degree will not change, exit pressure will not change. Exit pressure could be set by pilot valve spring.


Parameters


Nominal

Pressure

Shell Test

Pressure

Seal Test

Pressure

Adjust Range

Suitable

Medium

Medium

Temperature

1.0 MPa

1.5 MPa

1.1 MPa

0.09-0.8MPa

 

 Water

 

0-80

1.6 MPa

2.4 MPa

1.76 MPa

0.15-1.4MPa

2.5 MPa

3.75 MPa

2.75 MPa

0.2-2.0MPa










Features


1 Pressure controlling is stable and reliable. Pilot valve and needle valve works continuously, pressure change of downstream is continuous and steady, less influenced by entrance pressure.
2 Easy to operate. After working pressure setting, when upstream pressure or flow changes, main valve will adjust automatically to stabilize downstream pressure.
3 Valve adopts the design of full bore, straight-flow design, low head loss.



Material



Part Name

Material

Valve Cap

Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.

Spring

Spring steel, Stainless steel, etc.

Diaphragm depressor

Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.

Diaphragm

NBR, PTFE, etc.

Valve Rod

45# steel, Stainless steel 2Cr13, 1Cr18Ni9Ti, etc.

Valve Platen

Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.

Sealing Ring

NBR, PTFE, etc.

Sealing Ring Platen

Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.

Valve Seat

Copper alloy, Stainless Steel

Valve Body

Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.



Installation




Dimension



 

Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service

skype us

Skype: garygarlos

call us now

+86- 134 5600 7377

request a quote

Click to send feedback

NEWSLETTER
follow us
Contact Person
leave a message:
Contact Now
qr-code